DTF Transfers FAQ
File creation for printing
Please upload the file as .pdf; .ai; .eps .tiff or .png (min. 360 dpi). Areas that are not to be printed must remain transparent.
Design on 56 x 100 cm
Create your own motifs on the 56 x 100 cm format.
Design for tailored DTF transfers
File format can be created individually. The DTF transfers are cut to the desired quantity. Please create a file 1:1 according to the original dimensions.
line width/bar width
- at least 0.4 mm
- irrelevant within the motif
We print at least - 0.1 mm on the edges
This is how we avoid speed cameras, but unfortunately this cannot be adjusted for mixed LFM sheets and it remains at ONLY -0.1 mm.
Free data check
We do not print the file as you provide it to us. We will check the printability of the file free of charge in advance. If the file is not optimally suited for printing, we will contact you immediately. If you need a graphics service, please click here.
Free shipping (DE) + shipping Switzerland, Austria/EU
Whether individual transfers or LFM. From a print length of 5 LFM, shipping is free (DE). Under 5 LFM € 7.00 net per shopping cart will be charged.
Shipping to Austria is calculated at €13.00 net.
Shipping to Switzerland is calculated at €20.00 net.
Shipping to the rest of the EU will be charged at €15.00 net.
Which materials can be printed?
Cotton and polyester materials work equally well. This allows you to personalize your garments at any time. Nevertheless, we ask that you make your own test prints, as we assume no liability.
Coloring & color deviations
We print with CMYK + white. Whether created in RBG or CMYK, we can minimize color deviations using professional software. Transparent areas are NOT printed.
Processing of DTF transfers
Our DTF transfers can be removed hot.
We recommend the following parameters for cotton: 10-16 seconds, 145-160 °C, min. 4 - 4.5 bar pressure.
We recommend the following parameters for polyester: 10 seconds, 120-135 °C, min. 4 - 4.5 bar pressure.
Maybe 2-5 seconds after pressing.
DTF effect films such as gold, glitter, silver etc. must be removed cold.
Independent test procedures are recommended.
Warm removable "Hot Peel".
Our foil is warm peelable "Hot Peel". However, if the web width is less than 5 mm, the removal should be delayed. Remove the backing film within 12 hours, otherwise there is a risk of imprints.
Why DTF?
NEVER WEED AGAIN! Textile transfers are perfect for adding your individual logo to any piece of clothing.
The foils can be applied with transfer presses and hold equally well on cotton and polyester materials. This allows you to personalize your garments at any time.